> ## Documentation Index
> Fetch the complete documentation index at: https://docs.ploterr.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Single-family house

> A two-storey family house built with Floorkit. Walls, doors, windows, floors, a roof. Plans, drawings and a sheet come from one model.

This demo builds a **two-storey family house** as one Floorkit model. The house is 10 × 8 m on a 20 × 30 m plot, 6 m back from the street. A path goes to the front door, and a drive at the side holds a parked car. Two trees stand in the rear garden.

[Single-family house](https://floorkit-examples.ploterr.com/floorkit/demos/single-family-house?embed=1)

## What is in the model

* **Ground floor, 3.0 m.** A hall with the stair, a living room on the south side with two windows, and a kitchen with a dining table on the north side, with a glass door to the garden. A WC is under the stair.
* **First floor, 2.7 m.** A double bedroom of about 12.7 m², two single bedrooms of about 8.3 and 8.8 m², a bathroom, a study, a store and a landing with a window.
* **Walls.** The outer walls use one wall type, 300 mm thick: brick, insulation, block and plaster. The inner walls are 100 mm block.
* **Roof.** A gable roof at 35° with a 0.3 m overhang. The ridge runs along the long side, and the outer walls of the first floor follow the roof up to the gables.
* **Stair.** One straight stair of 17 equal risers of 176 mm. It runs between two walls, with a handrail on one side, and goes up through a hole in the first-floor slab. A guard rail runs along the hole on the landing.
* **Rooms and objects.** Every room has a name, a number and an area. About 40 catalog blocks furnish the rooms and the garden.

## What to try

1. On **Model**, orbit the house. Use **Fit view** to frame it again.
2. On **Plan**, select **Ground floor plan**, **First floor plan** or **Site plan** in **Storey**. Select a door or a wall and move it, then use **Undo** and **Redo**.
3. On **Drawings**, open **Section A**. It cuts along the stair and through the WC under it. Then open the **South elevation**, the **East elevation** and the **Roof plan**.
4. On **Sheet**, read sheet **A-101**. It shows both plans, the section, the south elevation and a room schedule. The schedule follows each edit that you make. Use **Download PDF** to save the sheet.
5. Use the **Metrics** button beside the theme toggle to see the frame rate and the size of the scene.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.