> ## Documentation Index
> Fetch the complete documentation index at: https://docs.ploterr.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Round a wall corner

> Fillet the corner of two walls, bend a wall into an arc and straighten it again.

Two walls that meet at a corner can meet in a curve instead. `fillet-walls` shortens both walls and puts one arc wall between them. `bend-wall` turns one segment into an arc and back.

[Live example](https://floorkit-examples.ploterr.com/floorkit/guides/round-a-wall-corner?embed=1)

## Before you start

You have a session from [Start a building](https://docs.ploterr.com/floorkit/guides/start-a-building.md). You know how to [draw a wall](https://docs.ploterr.com/floorkit/guides/draw-a-wall.md).

## Try it

The example has two walls that meet at a corner: 2 walls and no arc. Each control is one command from [Draw a wall](https://docs.ploterr.com/floorkit/guides/draw-a-wall.md#round-a-corner).

* **Fillet 1 m** and **Fillet 0.5 m** round the corner. There are 3 walls and 1 arc, and the readout shows the radius of the corner wall.
* **Bend the long wall** makes the long wall an arc as well: 3 walls and 2 arcs.
* **Straighten** makes it straight again: 3 walls and 1 arc.

## Next

> [card] [Draw a wall](https://docs.ploterr.com/floorkit/guides/draw-a-wall.md)
>
> The commands behind these controls, and the refusals of a fillet.

> [card] [Round a slab corner](https://docs.ploterr.com/floorkit/guides/round-a-slab-corner.md)
>
> Round the corners of a floor.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.