Skip to main content
This demo builds a hospital as one Floorkit model: a clinic on the ground floor, three ward floors above it and a plant room on the flat roof. The building is 60 m long and 24 m deep, measured to the centrelines of its outer walls. A spine corridor, 2.4 m clear between wall faces, runs the full length of every floor. Two cores, each with a stair and two bed lifts behind a lift lobby 3.4 m deep, stand at the thirds of the plan.

What is in the model

  • Ground floor, 4.5 m: the entrance on the south side, a glazed curtain wall with double doors, then reception, a waiting area with stacking chairs, a water cooler and planters, and a café corner. Along the north side are eight consulting rooms, each with an examination room. There are three accessible WCs, a pharmacy that serves through a hatch in the corridor wall, a staff room, and a plant and store strip on the north wall with doors to the service yard. A double door at the east end of the corridor opens onto the ambulance bay.
  • Ward floors 1 to 3, 3.6 m each: sixteen single patient rooms per floor, eight on each side of the corridor. Each room is 3.8 m between wall centrelines (3.6 m clear) and reaches the façade. The bed stands straight in from the 1.7 m double doorset, so a bed goes in and out without turning past a wall. Its head is on the side wall, so the bed space is 3.6 m from the head wall and 3.7 m along it, with room on both sides of the bed, a bedside table, an armchair and a wheelchair space. On the façade is an ensuite of 1.75 × 2.7 m with a level-access shower, an accessible WC and a basin, and the room window is beside it.
  • Observation: each pair of rooms shares a recess in the corridor wall with a touchdown desk. A window from the recess looks across the room to the head of the bed. Each wing also has a nurse station with a window to the corridor, and a ward office behind it.
  • Ward support: a treatment room, clean and dirty utility rooms, a staff WC, an accessible visitor WC beside a core, a day room, a ward kitchen, a staff rest room, a seminar room, and stores behind the lifts.
  • Cores: two U-shaped stairs with 170 mm maximum risers and 280 mm treads. The stair from the ground floor has 27 risers of 167 mm, and each ward stair has 22 risers of 164 mm. Each stair has a railing on both sides and a hole in the slab above it. The top floor has a guard rail at the edge of the stair hole. Each core has two bed lifts with a 2.3 × 3.2 m shaft, which holds a 1.8 × 2.7 m car, and 1.4 m lift doors.
  • Site: a 90 × 68 m plot with a forecourt, a path to the street, two rows of parking bays with parked cars, a drive, an ambulance bay, a service yard and trees. The paths, drives and bays are thin slabs.
The catalog has no reception desk, pharmacy counter, hospital bed or ambulance. This demo uses a café counter for the reception desk and the pharmacy counter, a single bed for the patient beds and couches, and office desks and chairs for the nurse stations. The ambulance bay is a marked area of the site.

What to try

  • On Model, orbit the building, then press Fit to frame it again. Select a patient room door, a bed or a wall to edit it, and use Undo and Redo.
  • On Plan, choose the ground floor, then a ward floor. Compare the rooms on each side of a touchdown recess: they are mirror images.
  • On Drawings, open Section A, which cuts through stair A and patient room 104, then the south and east elevations (the parked cars are left out of them), the site plan and the roof plan.
  • On Sheet, read sheet A-101 with the ground floor plan, the section and the schedule of the ground floor rooms, and press Download PDF.
Last modified on November 4, 2026