Skip to main content
Riverside is a mixed-use building of four storeys on a 50 × 34 m plot. One Floorkit model holds the site, the building and a second building as a mass. The 3D model, the plans, the drawings and the sheet all come from this model.

What is in the model

  • Ground floor, 4.2 m: a café and a shop behind two glass shopfronts on the south side. Each shopfront is a curtain wall of 8 bays with a transom at 3 m. Behind them are two stores, a back of house, an accessible WC and the core.
  • First to third floors, 3.1 m each: a corridor and four flats per floor. Each flat has a living room with a kitchen, a bedroom and a bathroom. The south side is a curtain wall of 6 bays.
  • Core: a U-shaped stair from the ground floor to the third floor, with a hole in each floor slab and a railing on each side, and a lift shaft with a hole in each floor slab above the ground. On each upper floor, the lift opens onto the corridor and the stair has its own lobby. On the ground floor, the residents enter from the street through their own door and a lobby.
  • Objects: 215 blocks from the Floorkit catalog, such as tables, beds, kitchens and bathroom fittings.
  • Second building: a mass of 14 × 12 m with three residential storeys of 3.1 m.
  • Roof: a flat roof of 0.25 m on top of the third floor.

Try this

  1. In Model, turn the building to see the shopfronts and the mass of the second building. Open Metrics to see the frame time and the draw calls.
  2. In Plan, choose a storey. Select a wall or a door to see its settings. Each room shows its name, number and area.
  3. In Drawings, open Section A through the core to see the stair and the floors. Open the south and north elevations and the roof plan.
  4. In Sheet, see the A1 sheet with the ground floor plan at 1:100, the section and the room schedule. Download it as a PDF.
  5. Make an edit, then use undo and redo.
Last modified on November 4, 2026