Skip to main content
This demo builds a two-storey family house as one Floorkit model. The house is 10 × 8 m on a 20 × 30 m plot, 6 m back from the street. A path goes to the front door, and a drive at the side holds a parked car. Two trees stand in the rear garden.

What is in the model

  • Ground floor, 3.0 m. A hall with the stair, a living room on the south side with two windows, and a kitchen with a dining table on the north side, with a glass door to the garden. A WC is under the stair.
  • First floor, 2.7 m. A double bedroom of about 12.7 m², two single bedrooms of about 8.3 and 8.8 m², a bathroom, a study, a store and a landing with a window.
  • Walls. The outer walls use one wall type, 300 mm thick: brick, insulation, block and plaster. The inner walls are 100 mm block.
  • Roof. A gable roof at 35° with a 0.3 m overhang. The ridge runs along the long side, and the outer walls of the first floor follow the roof up to the gables.
  • Stair. One straight stair of 17 equal risers of 176 mm. It runs between two walls, with a handrail on one side, and goes up through a hole in the first-floor slab. A guard rail runs along the hole on the landing.
  • Rooms and objects. Every room has a name, a number and an area. About 40 catalog blocks furnish the rooms and the garden.

What to try

  1. On Model, orbit the house. Use Fit view to frame it again.
  2. On Plan, select Ground floor plan, First floor plan or Site plan in Storey. Select a door or a wall and move it, then use Undo and Redo.
  3. On Drawings, open Section A. It cuts along the stair and through the WC under it. Then open the South elevation, the East elevation and the Roof plan.
  4. On Sheet, read sheet A-101. It shows both plans, the section, the south elevation and a room schedule. The schedule follows each edit that you make. Use Download PDF to save the sheet.
  5. Use the Metrics button beside the theme toggle to see the frame rate and the size of the scene.
Last modified on November 4, 2026