Skip to main content
This demo builds a row of four townhouses as one Floorkit model. Each house is 5.5 m wide and 10 m deep, with two storeys under one gable roof. The houses share their party walls: there is one 0.3 m wall on each line between two houses, not two. Houses 2 and 4 are mirror images of houses 1 and 3, so the stairs of each pair are back to back.

What is in the model

  • Ground floor, 2.9 m: a hall with the front door and the stair, a WC, a utility room, the living room at the front and the kitchen with dining at the back, with a glazed door to the garden.
  • First floor, 2.7 m: a double bedroom at the front, a twin bedroom at the back, and a bathroom and a landing in the middle.
  • Stair: a straight stair along the party wall, 16 risers of 181 mm on 280 mm goings, 4.48 m long, with a handrail and a hole in the first floor slab. A railing guards the hole on the landing.
  • Roof: one gable roof over the whole row, the ridge along the row, pitched at 30°. The end walls and the party walls rise to the roof.
  • Site: a 30 × 36 m plot with a front garden and a path to each door, a rear garden with a tree, a parking bay with a car, and a rear lane.
  • Rooms: 36 rooms, numbered per house (1.01 to 1.09 for house 1, 2.01 for house 2, and so on), with 120 furniture and site objects.
Mirrored furniture is the same catalog block with a negative X scale. Mirrored doors keep their swing into the same room.

What to try

  • On Model, orbit the row, then press Fit to frame it again. Select a wall, a door or a piece of furniture to edit it, and use Undo and Redo.
  • On Plan, choose the ground or the first floor. Compare house 1 with house 2 to see the mirrored layout.
  • On Drawings, open Section A, which cuts through the stair of house 1, then the south and north elevations and the roof plan.
  • On Sheet, read sheet A-101 with the ground floor plan, the section and the rooms schedule, and press Download PDF.
Last modified on November 4, 2026