Skip to main content
A curtain wall is a wall with a curtain grid. It keeps its points, its joins and its doors, so you draw it, move it and join it as any other wall. Floorkit builds mullions, transoms and panels in place of a solid body.

Before you start

You have a session from Start a building. This guide draws a small shop: three solid walls and a glass front with a door.

Make the wall a curtain wall

replace-wall-settings replaces all the settings of the wall, so read the settings it has and add curtain. This grid has bays no wider than 1.5 metres and one transom 2.5 metres above the base of the wall.

Make it a plain wall again

Apply its settings without curtain. Each change is one undo step.

The grid

Rules

  • The first and the last mullion stand at the faces of the walls that the curtain wall joins. The ends of the curtain wall have the same shape as the ends of a plain wall.
  • Two mullions closer than one mullion width become one.
  • On a straight wall divided by spacing, maxSpacing or count, the grid leaves no bay narrower than two mullion widths: a grid mullion that would make one is left out, and the bays beside it become one. Mullions placed with positions, and the grid of a curved wall, are kept as they are.
  • A curtain wall that stands on another curtain wall of the storey below, on the same line, shares the storey line with it: the lower wall keeps its head, and the upper wall has no sill over each bay that the lower head covers from end to end, so one member marks the storey line there. A bay the lower head covers only in part keeps its sill. Where the mullions of the two walls line up, they meet at the storey line. This holds for straight walls; a lower wall that follows a roof is not counted.
  • A door in a curtain wall gets a mullion at each side and a transom above it. The grid stops at the door. Above the door, the grid rows continue.
  • A window or a void in a curtain wall is refused with curtain-hosts-doors-only. A door too tall for its transom and the head is refused with curtain-door-too-tall.
  • On a curved wall each bay is a flat panel. A bay that would stand out of the wall, the bay over a door included, is refused with curtain-bay-off-arc, and the message gives the widest bay that fits.
  • A colour that is not "#rrggbb" is refused with bad-color. Every problem of a grid is reported, not only the first.
  • A curtain wall with topFollowsRoof follows the roof. The grid keeps the wall’s own height, with its head there. Where the roof underside rises above the head, the mullions go up to it and a row of panels fills the space above the head. Each mullion and panel is cut to the roof underside, as a plain wall is. A transom that the roof crosses is cut too, and a transom above the roof line, the head included, is left out. Where no roof covers the wall, it keeps its own height.
  • While you drag a curtain wall, it shows as a plain wall. The grid is built again when you release it.
  • A curtain wall has no layers. A wall with typeRef and a curtain grid is refused with curtain-wall-type. A wall with a wall type that meets a curtain wall joins it as one band of the curtain wall’s material.

In drawings and exports

  • In a plan the mullions are cut material and join the walls next to them. The glass and the spandrels are lines, with subId glazing or spandrel.
  • In 3D each part is its own body. wall.getCurtainParts() gives each body with its role: mullion, transom, spandrel or glazing.
  • In sections and elevations, the glass does not hide what is behind it.
  • An inspector edits the grid with one control: Wall.editableSchema() has the prop curtain with control kind curtain, which the host draws itself, as it does propertySets. ProjectManager.replaceFields(liveId, { curtain }) saves it as one replace-wall-settings step, with the same checks.
  • IFC export writes an IfcCurtainWall that aggregates an IfcMember (MULLION) for each mullion and transom and an IfcPlate (CURTAIN_PANEL) for each panel.

Next

Last modified on November 10, 2026