fillet-walls shortens both walls and puts one arc wall between them. bend-wall turns one segment into an arc and back.
Before you start
You have a session from Start a building. You know how to draw a wall.Try it
The example has two walls that meet at a corner: 2 walls and no arc. Each control is one command from Draw a wall.- Fillet 1 m and Fillet 0.5 m round the corner. There are 3 walls and 1 arc, and the readout shows the radius of the corner wall.
- Bend the long wall makes the long wall an arc as well: 3 walls and 2 arcs.
- Straighten makes it straight again: 3 walls and 1 arc.
Next
Draw a wall
The commands behind these controls, and the refusals of a fillet.
Round a slab corner
Round the corners of a floor.