Add a door

A door belongs to a wall. You give its position along the wall and its size. Floorkit cuts the opening and adds the frame, the panel and the plan symbol.

Before you start

Your building has the room room-walls from Draw a wall.

Add the door

The centre of this door is 2 metres from the first point of the wall, on the first side of the room.

import type { BuildingSession } from '@opengeometry/floorkit';

export function addDoor(session: BuildingSession): void {
  session.apply(
    {
      kind: 'add-hosted-opening',
      buildingId: 'building',
      storeyId: 'ground',
      wallId: 'room-walls',
      opening: {
        id: 'entry-door',
        kind: 'door',
        offset: 2,
        width: 0.9,
        height: 2.1,
        doorQuadrant: 1,
      },
    },
    session.revision,
  );
}

Set the swing

doorQuadrant sets the hinge side and the swing side. Stand at the first point of the wall and look along the wall.

`doorQuadrant`	Hinge	Swings to your
`1`	Near jamb, at the smaller `offset`	Left
`2`	Far jamb, at the larger `offset`	Left
`3`	Near jamb	Right
`4`	Far jamb	Right

swingAngleDegrees sets the angle of the open door panel.

Rules

offset, width and height are in metres.
The full door, with its frame, must fit in the wall. It must not overlap a different opening.
baseHeight lifts the threshold above the base of the wall. The default is 0.
If the door does not fit, apply throws an error and the building does not change.

Move or remove the door

export function moveDoor(session: BuildingSession): void {
  session.apply(
    {
      kind: 'move-hosted-opening',
      buildingId: 'building',
      storeyId: 'ground',
      wallId: 'room-walls',
      openingId: 'entry-door',
      offset: 3,
    },
    session.revision,
  );
}

export function removeDoor(session: BuildingSession): void {
  session.apply(
    {
      kind: 'remove-hosted-opening',
      buildingId: 'building',
      storeyId: 'ground',
      wallId: 'room-walls',
      openingId: 'entry-door',
    },
    session.revision,
  );
}

Move the door to another wall

rehost-hosted-opening takes the door out of its wall and puts it in a different wall of the same storey. offset is the distance along the new wall.

export function moveDoorToWall(session: BuildingSession): void {
  session.apply(
    {
      kind: 'rehost-hosted-opening',
      buildingId: 'building',
      storeyId: 'ground',
      wallId: 'room-walls',
      openingId: 'entry-door',
      toWallId: 'garden-wall',
      offset: 3,
    },
    session.revision,
  );
}

The door keeps its size and its data. The old wall has no cut there after the edit, and the new wall has one. If the door does not fit in the new wall, apply throws an error and the building does not change.

Add a window

Put a window in the same wall.

Door API

See each option of a door.

Documentation

Before you start

Add the door

Set the swing

Rules

Move or remove the door

Move the door to another wall

Next

Add a window

Door API

​Before you start

​Add the door

​Set the swing

​Rules

​Move or remove the door

​Move the door to another wall

​Next

Add a window

Door API

Before you start

Add the door

Set the swing

Rules

Move or remove the door

Move the door to another wall

Next